MSM-508FCS: Single-mode, SC Connector, 6-Port 10/100 Base-T + 2-Port 100 Base-FX Fiber Managed Switch with metal case and 1 x RS-232 port

MSM-508FCS

E-mail this Product

Product Reference & Support :

Single-mode, SC Connector, 6-Port 10/100 Base-T + 2-Port 100 Base-FX Fiber Managed Switch with metal case and 1 x RS-232 port

Product Pricing:

MSM-508FCS: $1,259.00

Please Call 1-888-971-9888 for Volume and OEM discount pricing!

Features

The MSM-508FCS is an 8-Port Industrial Ethernet Layer 2 Managed Switch with 2-Port Fiber (SC Connector; Single-mode) that secures data transmission by using fiber optics transmission to provide immunity from EMI/RFI interference. It is uses Ethernet for transmitting a signal up to 15km, and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion.

Fiber ports of MSM-508FCS operate at full duplex mode. In full duplex mode, range is 15km with 8.3/125, 8.7/125, 9/125 or 10/125 μm fiber cables. The Ethernet port of MSM-508FCS supports 10/ 100M auto-negotiation feature and auto MDI /MDIX function.

It can be managed through RS-232 port via serial console or Ethernet port using telnet or Web browser. In addition, the switch supports a lot of powerful managed functions, such as 802.1Q Tag-based VLAN, Port-based VLAN, 802.1p QoS (Quality of Service), Port Trunking, Spanning Tree, Cable Testing and Port Mirroring. Built-in ICP DAS Cyber-Ring technique that enable multiple switches to be placed into a redundant ring. The switch detects and recovers from a fiber or copper link failure within approximately 50ms – for the majority of applications a seamless process. Modbus/TCP, Modbus/RTU and OPC supported, SCADA application can monitor status of Ethernet and fiber port with Modbus or OPC protocol.

MSM-508FCS provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fail, the other live source acts as a backup to automatically support the MSM-508FCS's power needs. And, the relay output facility can deliver warning signal while dual power or network link failure.

Automatic MDI / MDI-X crossover for plug-and-play
Each port supports both 10/100 Mbps speed auto negotiation
Store-and-forward architecture
Full duplex IEEE 802.3x and half duplex backpressure flow control
3.2Gbps high performance memory bandwidth
Frame buffer memory : 1 Mbit
Integrated look-up engine with dedicated 2 K unicast MAC addresses.
Redundant Power Inputs +10 ~ +30V DC
Power failure alarm by relay output
Supports operating temperatures from 0°C ~ +70°C
DIN rail mount and Screw hole for wall mounting kit.

Specifications & Additional Information

Technology
Standards	IEEE 802.3, IEEE 802.3u, IEEE802.3x
Processing Type	Store & forward wire speed switching - no delays
MAC addresses supported	2K
Memory Bandwidth	3.2 Gbps
Flow Control	IEEE802.3x flow control, back pressure flow control
Redundant strategy	STP, Ring(ICP DAS)
Protocol	VLAN, QoS, Port Trunk, SMTP, TELNET, SNMP
Interface
RJ45 port	10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDIX connection
Fiber Optics Port	100 Base-FX(Single-mode; SC connector)
LED Indicators	10/100M, Link/Act/Backup, Full duplex/Half duplex(Fiber Port)
Ethernet Isolation	1500 Vrms 1 minute
Frame Ground for EMS Protection	Yes
Ethernet Transmission distance	Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm
Fiber Optic Transmission distance	Single-mode fiber cables:8.3/125, 8.7/125, 9/125 or 10/125 μm
	Distance :15 km, (9/125 μm recommended) for full duplex
	Wavelength : 1300 or 1310nm
	Min. TX Output: -15 dBm
	Max. TX Output: -8 dBm
	RX Sensitivity: -36 to -31 dBm
Ethernet Cables	10 Base-T (Cat.3, 4, 5 UTP cable; 100m Max.) 100 Base-TX (Cat.5 UTP cable; 100m Max.)
Management interface	Console, DIP/Rotary Switch
Alarm output	Relay
Power
Input Voltage Range	+12 VDC ~ +48 VDC (Non-isolation redundant input)
Power Input isolation	1KV
Alarm Contact	One relay output with current carrying capacity of 2A @ 30 VDC
Power consumption	0.3A@24Vdc (+/- 5%, arrowed)
Protection	Power reverse polarity protection
Frame Ground for EMS Protection	Yes
Connection	7-Pin Removable Terminal Block
Mechanical
Case	Metal
Environmental rating	IP20
Dimensions	72.5mm x 110mm x 102mm (W x H x D)
Includes Cable	CA-090510 x 1
Installation	DIN rail mount; Wall Mounting
Environmental
Operating temperature	0°C~ +70°C
Storage Temperature	-20°C ~ +85°C
Relative Humidity	10% to 90% non-condensing

	Data Communication Home

	Switches

	Converters

	Gateways

	Communication Boards

ICP DAS Data Communication